Sprayed some primer on the undersurface.
It was 33 degrees celsius outside in the shade this afternoon so it took seconds to dry.
It tells me I need to do a bit
more to the engines.
The rest of the underside is fine as it is,
considering it will hardly be seen when the model is ever on display.
Thanks for looking.
More soon...
About this Blog
This is about the combination of two interests, Radio Control vehicles and Science Fiction models. This blog documents my science fiction spaceship and radio controlled vehicle projects.
Friday, 15 November 2019
Sunday, 10 November 2019
Resilient cruiser part 5
I have mostly completed the underside detailing.
There is still a bit to do at the nose end but I want to complete the top and start on the sides first to see what ends up around that area.
I am going to spray a bit of primer first , just to see how its going, before I flip it over.
Thanks for looking.
More soon...
There is still a bit to do at the nose end but I want to complete the top and start on the sides first to see what ends up around that area.
I am going to spray a bit of primer first , just to see how its going, before I flip it over.
Thanks for looking.
More soon...
Subscribe to:
Comments (Atom)
Most Popular Posts in the Last 7 Days
-
This model was started around the same time as the "Sony" model. It is so close to being finished I don't know why I didn'...
-
The Speed controller is a cheap brushed controller capable of running 3s - 6s (12 - 24 volts). I'm only using two 2s lipos in series pro...
-
This model was made in the late 90's. It was again made from a disparate collection of shapes. There is a central spine made of some PV...
-
Here is another project that has been commenced, I'm calling it a Moon Bus. Below is the rough design thumbnails. The design started wit...
-
I thought it might be interesting to look at some of my old Spaceship models starting with this one. While this model is not strictly an RC ...
-
To test out my idea of one geared motor per wheel in a spin steer vehicle I built a quick chassis out of wood. The purpose was to test whet...













