I did add a bit more detail around the engine nozzles and the rear landing gear winglets before spraying the the primer.
There is a little bit of spot filling and sanding to do next and I need to devise a suitable paint scheme for it.
More soon...
Designing, scratchbuilding and kitbashing Sci fi Spaceships and radio controlled vehicles.
Sunday, 2 October 2016
Escape Pod Mk2 part3
Here is the Escape Pod Mk2 with the first coat of grey primer. I used a "sandable" primer which is a darker grey than the standard one.
I did add a bit more detail around the engine nozzles and the rear landing gear winglets before spraying the the primer.
There is a little bit of spot filling and sanding to do next and I need to devise a suitable paint scheme for it.
More soon...
I did add a bit more detail around the engine nozzles and the rear landing gear winglets before spraying the the primer.
There is a little bit of spot filling and sanding to do next and I need to devise a suitable paint scheme for it.
More soon...
Subscribe to:
Post Comments (Atom)
Most Popular Posts in the Last 7 Days
-
This model was started around the same time as the "Sony" model. It is so close to being finished I don't know why I didn'... -
Part 1 here Most of the large toybashed detail pieces have now been superglued to the underside of the flat top. The final placement diff... -
With a dozen or so of unfinished projects lying around I started a new one I call the Space Barge. Over a year ago I purchased a couple o... -
Once the 3D printed main hull was completed it was time to go old school and fill in the undersides with kit-bashed detail. In the picture b... -
Thanks to a reader comment I have finalised the design and construction of the forward pontoons. The reader suggested that the original Ba... -
This model was made in the late 90's. It was again made from a disparate collection of shapes. There is a central spine made of some PV...
Inspirational as always. Thanks for posting.
ReplyDelete