Primer is on.
It didn't take too long to dry as it was 36 degrees Celsius here in the south west of Western Australia today. The primer overspray dried as it fell. Went around with a scotch brite pad to knock of all the furry bits of primer.
I decided to chip a couple of the black 1mm styrene panels off the top at the rear as I didn't like them.
I forgot to replace the hole plugs when I took the photos.
I will scribe some panel lines into the plainer surfaces.
more soon...
About this Blog
This is about the combination of two interests, Radio Control vehicles and Science Fiction models. This blog documents my science fiction spaceship and radio controlled vehicle projects.
Subscribe to:
Post Comments (Atom)
Most Popular Posts in the Last 7 Days
-
This model was started around the same time as the "Sony" model. It is so close to being finished I don't know why I didn'...
-
Almost 10 years ago in 2015 I did a post called Giant Tyres and DIY PVC wheels . In that post I showed a method of making some beadlock whe...
-
The last three spaceships actually got finished. This one however never has been finished as I was never happy with the way it looked. Over ...
-
To test out my idea of one geared motor per wheel in a spin steer vehicle I built a quick chassis out of wood. The purpose was to test whet...
-
Readers of this infrequent blog will know I have an obsession with massive RC tyres and recently I acquired 3 pairs of the biggest RC t...
-
Some progress has been made on the detailing of the Explorer hull. The black bits are 1mm styrene sheet. the corner triangles are 2mm...
Woow. You are one of the greatest model builder, what i ever seen. Great work.
ReplyDelete