About this Blog

This is about the combination of two interests, Radio Control vehicles and Science Fiction models. This blog documents my science fiction spaceship and radio controlled vehicle projects.

Saturday 8 June 2013

Old Spaceship model Part 2

This is  the oldest model I still have. It was made in 1985 or 1986. I was working as an industrial model maker as briefly described in my previous post, and was much more confident in trying out some new techniques. It is heavily inspired by some concept work that Chris Foss did for an unfilmed version of Dune seen in the book 21st century Foss. It was mainly the striated colours that I appropriated for my own shaped spacecraft but most people recognise the Fossian influence. In fact it was this model along with another spaceship I no longer have, that I took in a suitcase with me across the country to Sydney, at the end of 1986, in  an attempt to get work in special effects. The attempt I might add was successful.


The model was shaped out of a block of green polyurethane foam and then skinned with glass cloth and polyester resin. After lots and lots of sanding and primer and spray putty and more sanding, more primer more spray putty, more sanding... you get the idea..I ended up with a reasonably smooth shape. Model kit parts were sparingly applied. Recessed sections were superglued into holes cut into the skin. The engine nozzles were some smaller scale pvc pile guides as described in the previous post, with added strips.

You can see some damage from having been dropped.  To be expected after all these years and having had small children when the model was displayed on a shelf.

The interior nozzles were parts from a Micronaut toy from the late seventies.

The attitude thrusters were the wheels from a micronaut toy.




The patterning was done by spraying the model red and then freehand painting liquid mask on the bits I wanted to stay red, then spraying blue.
Very faintly seen in the photographs are panel colouring variations. It took forever to apply hundreds of tiny masking tape rectangles which were then over sprayed by a light dusting of white to produce the lighter shaded panels. It should have been a heavier application as it is barely visible. A few random small decals were applied along with lots of the kerning marks from rub on letraset sheets to represent windows.
The model is 650 millimetres long.

No comments:

Post a Comment

Most Popular Posts in the Last 7 Days