Here is the Escape Pod Mk2 with the first coat of grey primer. I used a "sandable" primer which is a darker grey than the standard one.
I did add a bit more detail around the engine nozzles and the rear landing gear winglets before spraying the the primer.
There is a little bit of spot filling and sanding to do next and I need to devise a suitable paint scheme for it.
More soon...
About this Blog
This is about the combination of two interests, Radio Control vehicles and Science Fiction models. This blog documents my science fiction spaceship and radio controlled vehicle projects.
Subscribe to:
Post Comments (Atom)
Most Popular Posts in the Last 7 Days
-
True to form I started a new project, when I have so many others crying out for completion. I have had the tracked lower section of the Br...
-
There hasn't been much modeling going on for a while now as I was laid off at work and have been scrambling to find some employment. No...
-
This model was started around the same time as the "Sony" model. It is so close to being finished I don't know why I didn'...
-
This model was made in the late 90's. It was again made from a disparate collection of shapes. There is a central spine made of some PV...
-
I weathered the bridge interior and added 1/72 figures to the cockpit. Unfortunately I forgot to take photos of the result which is now hidd...
-
I have completed the bridge interior for the Container Spaceship. The figures are 1/48 scale. I had to make separate walls and floor and ba...
Inspirational as always. Thanks for posting.
ReplyDelete