Primer is on.
It didn't take too long to dry as it was 36 degrees Celsius here in the south west of Western Australia today. The primer overspray dried as it fell. Went around with a scotch brite pad to knock of all the furry bits of primer.
I decided to chip a couple of the black 1mm styrene panels off the top at the rear as I didn't like them.
I forgot to replace the hole plugs when I took the photos.
I will scribe some panel lines into the plainer surfaces.
more soon...
About this Blog
This is about the combination of two interests, Radio Control vehicles and Science Fiction models. This blog documents my science fiction spaceship and radio controlled vehicle projects.
Subscribe to:
Post Comments (Atom)
Most Popular Posts in the Last 7 Days
-
True to form I started a new project, when I have so many others crying out for completion. I have had the tracked lower section of the Br...
-
There hasn't been much modeling going on for a while now as I was laid off at work and have been scrambling to find some employment. No...
-
This model was started around the same time as the "Sony" model. It is so close to being finished I don't know why I didn'...
-
This model was made in the late 90's. It was again made from a disparate collection of shapes. There is a central spine made of some PV...
-
I weathered the bridge interior and added 1/72 figures to the cockpit. Unfortunately I forgot to take photos of the result which is now hidd...
-
I have completed the bridge interior for the Container Spaceship. The figures are 1/48 scale. I had to make separate walls and floor and ba...
Woow. You are one of the greatest model builder, what i ever seen. Great work.
ReplyDelete